Skip to product information
1 of 1

CAR HACKER

Mercedes ME 9.7 Engine Computer SCN Coding ,Programming, Unlocking, Cloning, VIN

Mercedes ME 9.7 Engine Computer SCN Coding ,Programming, Unlocking, Cloning, VIN

Regular price $299.99
Regular price Sale price $299.99
Sale Sold out
Shipping calculated at checkout.

This service is for Mercedes ME 9.7 Engine Computer SCN Coding ,Programming, Unlocking, Cloning, VIN

If you have a Mercedes and your ME9.7 ECU is bad?

COMMON ECU FAILURE SYMTOMS:

  • ECU no communication
  • Persistent O2 Sensor code
  • Persistent Camshaft or Crankshaft codes
  • No Crank, No Start
  • Crank, No Start
  • Random, Multiple Codes
  • Misfire Codes
  • Radiator FAN is blowing at full speed & has no control

( Flooded, Burnt, Electrical damage ETC )

we can help you programming new or used ECU.

Replaced USED ECU car don’t start ?

Replaced USED ECU wrong VIN?

No ground going to relay from ECU?

We can help read the VIN and SCN Coding (Security info) from your old ECU and program it to your used or new ECU

BOTH ECU PART NUMBERS MUST MATCH IF PART NUMBERS ARE DIFFERENT CALL DEALER TO MAKE SURE IT WILL WORK FOR YOUR CAR WE GUARANTEE OUR CLONE SERVICE NOT THE ECU YOU PROVIDE

For the Cloning service there are 2 different options we provide.

            1.  Send us Your Original ECU and the Donor to clone the information ( Make sure the Original Can communicate using a OBD Scanner )  If not see option 2

            2.  If your Original is badly damaged, then we will need to Ignition Switch, Key, and Donor Module to program the Immobilizer system and Marry them on Bench.

Add to cart, pay and send BOTH ECUs marked old (original) and new (used or new donor ECU) with a receipt or order number to:

KARMAN AUTO

OTHER OPTIONS:

ECU Cloning is procedure where the original ECU information is copied to the replacement ECU, and allows it to be reused. The Mercedes scan tool is not required to complete the re-installation.

ECU Virginizing is similar to ECU CloningECU Virginizing is a procedure where a known good, used replacement ECU is reconfigured into a like-new or “virgin” state, also known as “renewing”. The ECU can then be used to replace the original, but requires coding using the Mercedes scan tool. Typically this is employed where the original is not salvageable ( flooded burnt etc. )

IMMO delete is the last resort if both options didn’t work or to expansive it will program ECU to no security state. (Not available on all ECUs contact us about this option for your ECU)

Mercedes ECU up to 2005 uses an eprom or MPU to store data newer Mercedes 2006 and newer stores data in 3 different locations eprom, MPU and MPU.

For years 2005 and older click here.

View full details